ISO/IEC 22243:2019

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٣٠ سبتمبر ٢٠١٩

Information technology — Radio frequency identification for item management — Methods for localization of RFID tags

ملفات الوثيقة ISO/IEC 22243:2019

الإنجليزية 15 صفحات
الإصدار الحالي
47.34 OMR

مجال الوثيقة ISO/IEC 22243:2019

This document defines how to use the RFID air interface standards of the ISO/IEC 18000 series that are based on backscatter technology for localization of RFID tags, specifically tags which are ISO/IEC 18000‑4, ISO/IEC 18000‑61, ISO/IEC 18000-62, ISO/IEC 18000-63 and ISO/IEC 18000-64 compliant.

This document specifies the physical and logical requirements for localization. The system comprises interrogators, also known as readers, and tags, also known as labels. An interrogator receives information from a tag by transmitting a modulated RF signal to the tag and the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the interrogator. The modulated RF signal for data exchange is based on the relevant part of the ISO/IEC 18000 series and, in addition, there is a superimposed modulated RF signal with the same or different carrier frequency intended for localization. This document describes the signals required for localization, the method to derive localization information from the signals received by the interrogator and the requirements onto tags and interrogators.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 19490:2025
 
مواصفة قياسية دولية
Dentistry — Sinus membrane elevator
ISO 8168:2025
 
مواصفة قياسية دولية
Aerospace — Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1 100 MPa — Procurement specification
ISO 2903-2:2025
 
مواصفة قياسية دولية
ISO metric trapezoidal screw threads — Tolerances — Part 2: Limits of sizes
ISO 10545-23:2025
 
مواصفة قياسية دولية
Ceramic tiles — Part 23: Determination of elastic modulus for glazed and unglazed ceramic tiles, substrate and glaze layer